Cubiertas móviles

Jorge Vizcaya

July 2017

Elevated and motorized aluminium sliding roof with a polygonal cover geometry and supports at the same level (+3.00 m from FFL).

31.26 m width × 60.00 m length × 5.13 m overall building height.
Roof divided into 6 portions, 4 of which are mobile and the other 2 are fixed.

Central towards both ends.

0.10 m/s

October 2016

Elevated and motorized aluminium sliding roof with a polygonal cover geometry and supports at the same level.

22.64 m width × 45.15 m length × 3.36 m height measured from the rolling surface.
Roof divided into 6 modules, 4 of which are mobile and the other 2 are fixed.

Central towards both ends.

0.08 m/s

Uniform, with shock-absorbers in the contact between mobile cover modules.

February 2013

Elevated and motorized sliding retractable roof with lowered arch cover geometry and supports at the same level (+4.05 m from FFL).

10.40 m width × 16.40 m length × 4.05 m column's height × 7.90 m overall building height.
Roof divided into 6 modules, 4 of which are mobile and the other 2 are fixed. 

Central opening from the largest to the smallest mobile cover module.

Miguel Angel Bayo

May 2007

Elevated and motorized aluminium retractable roof with a polygonal geometry and supports at the same level.

18.05 m width × 23.98 m length × 3.10 m roof height measured from the rolling path level.
Roof divided into 6 portion, 4 of which are movable plus the other 2 are fixed.

Central towards both ends.

0.08 m/s

Jordi Macri

September 1998

Elevated sliding roof with a lowered arch geometry and supports at the same level.

18.09 m width × 34.43 m length × 3.70 m roof height measured from rolling surface.
Roof divided into 3 mobile roof portions.

Telescopic in one direction.

0.13 m/s.

Variable, with deceleration on contact between mobile cover portions.

Carlos Martinez

April 1998

Elevated motorized retractable roof with a tunnel segmental canopy geometry and supports at the same level.

11.00 m width × 14.00 m length.
Roof divided into 3 mobile cover portions.

Telescopic, in one direction.

0.07 m/s

Uniform, with shock absorbers in the contact between mobile cover portions.

Ramón Torra i Xicoy

April 1994

Elevated sliding roof with a segmental vault cover shape with supports at the same level (+2.50 m from the FFL).
The facility is completed at the lower part with a perimeter closure consisting of bi-folding doors.

18.00 m width × 33.00 m length × 2.50 pillars height × 5.50 m overall enclosure height.

Joan Francesc Chico i Contijoch

June 1992

Elevated sliding roof with a lowered arch cover geometry and supports at different level.

36.00 m width × 60.00 m length.
Roof divided into 4 retractable cover modules plus 2 fixed end modules.

Central towards both ends.

0.13 m/s

Juan Carlos López González

Jauary 1999

Elevated sliding roof with asymetric double-spoke vault shape and supports at the same level (+2.50 m above the FFL).
The facility is completed at the lower part with a perimeter closure consisting of detachable aluminium panels.

Juan Ignacio Herrero Fernández

May 1999

Lean-to telescopic enclosure with an elliptic double-spoke roof shape.

36.5 m width × 43.00 m length × 11.85 m enclosure height.
Roof divided into 3 mobile cover modules plus 1 fixed end module.

Telescopic, in one direction.

0.07 m/s